The snail horn, as a type of horn that we often see, can be seen in most cars. Its low pitched sound is not harsh, so it has been welcomed by most people in the industry. So, do you know what we should pay attention to when it comes to snail horns? Next, the editor will take you to get to know each other, hoping to help you.

1、 Snail horn often checks the output voltage of the generator. High voltage can burn out the horn contacts, while low voltage (below the rated voltage of the horn) will cause the horn to produce abnormal sounds.
2、 Do not put any foreign objects into the speaker to avoid causing abnormal sounds.
Regularly check and tighten the fixing screws of the horn and bracket to ensure reliable grounding.
3、 The continuous pronunciation of the horn should not exceed 10 seconds to avoid damaging the horn.
4、 Regularly keep the appearance of the horn clean and ensure that all wiring is secure.
5、 When washing the car, do not rinse the horn directly with water to prevent water from entering the horn and causing it to not sound.
6、 When repairing the horn, attention should be paid to the position of each metal pad and insulation pad, and they should not be installed incorrectly.
7、 The method of fixing the horn has a significant impact on its pronunciation. In order to ensure the normal sound of the horn, it cannot be rigidly installed, so it is fixed on a buffer bracket, that is, a sheet-like spring or rubber pad should be installed between the horn and the fixed bracket.
8、 Regularly check and tighten the fixing screws of the horn and bracket to ensure reliable grounding.
The treatment method for water ingress into the snail horn on the fishing platform:
There are many ways to deal with water ingress into the horn, and the best way is to open it to dry and let the water inside evaporate on its own. Otherwise, over time, it may cause a short circuit in the circuit. Alternatively, if there is not much water ingress, you can choose to remove the horn, control the water to dry, and then reinstall it. However, be careful not to lose the parts when installing it back. Friends who are not afraid of trouble can also choose to use a hair dryer to heat the horn, causing the water in the horn to evaporate. After the water evaporates, the horn will recover.
The above is all the content shared by the editor today. I believe that after reading this article, you will have a deeper understanding of the snail horn. If you have any further questions, you can visit our official website for consultation, or call our staff directly to get in touch. Our staff will provide you with answers one by one.