Clutch spring, as its name suggests, is a type of spring placed in a clutch and is considered a common item in our daily lives. After prolonged use, the surface of the clutch spring will become stained, which can have some impact on the clutch. At this time, we need to clean it. When cleaning, we need to meet several requirements to make it cleaner. In the following article, we have compiled several precautions for cleaning clutch springs and how to clean them. Friends in need can take a look.

When washing, please be careful not to cause surface scratches and avoid using bleach and detergent containing abrasives, steel wire balls (brush rollers), grinding tools, etc. To remove the detergent, rinse the surface with clean water at the end of the washing process.
Surface condition and washing method
1. Wash dust and easily removable dirt with soap, weak detergent, or warm water.
2. Use warm water and weak detergent to scrub the labels and film.
3. The adhesive component uses alcohol or organic solution.
4. Fat, oil, and lubricant contamination should be wiped dry with a soft cloth or paper, and then washed with neutral detergent, ammonia solution, or specialized detergent.
5. Immediately rinse with water for bleach and acid attachment, soak in ammonia or neutral carbonated soda solution, and then wash with neutral detergent or warm water.
6. Organic carbides are attached and soaked in a hot neutral detergent or ammonia solution, and then the fingerprints are washed with a detergent containing weak grinding. Alcohol or organic solvents (ether, benzene) are used, and a soft cloth is used to dry the fingerprints before washing with water.
7. Excessive use of detergent or oil can cause rainbow patterns. When washing, use warm water neutral detergent.
8. Wash the welding with a 10% nitric acid or hydrofluoric acid solution for discoloration caused by heat, and then neutralize it with a dilute solution of ammonia, carbonate, and baking soda. 9. Wash the clutch spring with water - specifically for washing drugs. The ability to control the hot forming process of springs leads to poor accuracy in controlling the shape in three directions; Moreover, there is no automatic rod material rotation control and adjustment mechanism, so the level and ability of hot coil spring forming process are relatively low. Therefore, the accuracy level and surface oxidation decarburization level of the fishbed clutch spring are also relatively low.
10. Rust caused by surface pollutants should be washed with nitric acid (10%) or grinding detergent - using specialized cleaning agents.
The above are the precautions and requirements for cleaning clutch springs. It is not only about cleaning, but also more important in selection and later maintenance. Only by taking multiple measures can the service life of the machine be extended and the work be carried out more smoothly. If friends are interested in our article, they can follow our official website for your next viewing convenience.